Summit Audio - TLA-50 (Minature Tube Leveler)
Ease of operation
Smooth Summit character combined with straight-forward controls make the TLA-50 a favorite in even the most high end recording facilities and live rigs.
Maximum flexibility
The TLA-50 provides a comprehensive array of inputs and outputs, allowing it to be integrated into almost any live or studio applications.
It's a family affair
The TLA-50 uses the exact same compression cell as its big brother the TLA-100A, giving you access to the same world-renowned compression sound the pros have been using for 25 years.
Really well built
The Summit Audio design philosophy considers the entire package when it comes to crafting gear. We pay special attention to the details of construction and have included many refinements over the years so units are durable enough to handle the rigors of the road. That's one of the reasons why you'll find Summit gear on tour with many of today’s top touring acts around the world.
Easy to use.
A primary design goal of the 2BA 221 was to provide an extreme amount of fine-tuning. One of the ways we achieve this is to allow you to variably adjust the mic input impedance. This opens up a wide variety of possible tones from a single microphone, turning a small mic locker into a much larger one by letting you tweak the way each of your microphones sound!
Hand-crafted in the USA
Each piece of Summit gear is meticulously crafted by hand in our shop using only the best quality components and attention to detail. Quality components and engineering know-how are the critical element to the sound and longevity of audio gear.
Technical Specifications
Size and Weight
- Height:
- 1.75 inches (4.44 cm)
- Width:
- 8.5 inches (21.59 cm)
- Depth:
- 8.5 inches (21.59 cm)
- Weight:
- 5 pounds (2.77 kg)
Power Configuration
- Internal AC Supply
- 20 watts, 115, 50 or 60 Hz (USA model)
- Fuse size .5 amp, slo-blo for 100/115 V
- Fuse size .25 amp, slo-blo at 230 V
Input Impedendance
- Mic: 1.5K ohms
- Hi-Z: 10K-1.75M ohms
- Output impedance (XLR): 150 ohms
Connections
- Inputs: +4 dB female XLR and -10dB 1/4"
- Outputs: +4 dB male XLR and 1/4" -10 dB balanced
- Insert: 1/4" TRS balanced line level output
- Stereo Link: 1/4" mono Jack
- Side Chain: 1/4 stereo jack for Tip/Ring signal processing
Max input level
- Max input level: +20 dBu
- Max output level (XLR): +25dBu
- Max gain: 24dBu
Operating Measurements
- Frequency response: 20Hz-20kHz +/-1dB w/6dB compression
- Signal to noise ratio: 120dB
- THD + Noise: 0.05% +4dB, 3dB compression
- Vacuum tubes: 12AX7A
Warranty
- 3 year limited warranty.